AWE Tuning
AWE Tuning 3015-33064 - Audi C7 A7 3.0T Touring Edition Exhaust - Dual Outlet Diamond Black Tips

AWE Tuning Audi A7 Touring Edition Exhaust Highlights:

• Featuring AWE Tuning
• Max gains of 12 hp and 11 ft-lbs of torque at the crank on stock software
• Crafted from mandrel-bent 2.5" T304 stainless steel
• Full system replaces factory downpipes and exhaust
• Available in dual tip configurations
• Resonated Downpipes available independently
• Developed, tested, and manufactured in-house at AWE Tuning.
• Available with Diamond Black 4-inch adjustable slash-cut tips
• Featuring No CEL Guarantee
• Lifetime Exhaust Warranty

The AWE Tuning Audi C7 A7 Exhaust Suite:

• Dual outlet: 102mm slash cut tip on each side of the vehicle, designed to work with the factory rear valance.

Downpipe Removal Tool is a must have.

Sound Perfection: AWE Tuning 180 Technology™

The tone that was accomplished for the A7 is due in part to AWE Tuning's 180 Technology™.

As exhaust gases exit the 3.0T engine and flow into an AWE Tuning 180 Technology™ equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. 

Finish it off:

The AWE Tuning C7 A7 Touring Edition exhaust system is capped off with Diamond Black 102mm slash cut tips, featuring the AWE Tuning logo in Dual tip configurations. These tips are double walled to ensure a mirror finish even under hard usage. Each tip is individually adjustable, so stagger and depth into bumper can be set according to personal taste.

Other things you'll want to know:

The AWE Tuning A7 Touring Edition Exhaust includes exhaust tips, all necessary hardware including under chassis brace spacers and hardware, aluminum collars, wrench, Accu-Seal, and T-Bolt clamps.

*** The item above, if not in stock, is build-to-order and may require additional shipping and handling time. If it is not designated as "IN-STOCK" above, then please call for an accurate ETA. Or, you may place your order and you will receive an ETA shortly thereafter.

This Part Fits: